Lenovo ThinkSystem SR630 V3 - RAID and HBA Adapter Connectors

1 NVMe 1
2 Power
3 NVMe 0
Figure 216. Rear 2 x 2.5-inch NVMe backplane
1 SAS
2 Power
Figure 217. Rear 2 x 2.5-inch SAS/SATA backplane
M.2 drive backplane
To locate the connectors on the M.2 drive backplane, see
“M.2 backplane and M.2 drive replacement” on
page 157
for details.
RAID and HBA adapter connectors
See this section to locate the connectors on RAID and HBA adapters.
The following adapter illustrations are examples taken from the storage controller matrix of your server, see
“Technical specifications” on page 4 for more adapters supported. The illustrations might look slightly
different from physical adapters.
•
“SFF RAID and HBA adapters” on page 254
– Figure 218 “A Gen 3 8i SFF HBA adapter (two port connectors)” on page 255
– Figure 219 “A Gen 3 16i SFF RAID adapter (four port connectors)” on page 255
– Figure 220 “A Gen 4 8i SFF RAID adapter (one port connector)” on page 256
• “CFF RAID adapters” on page 256
– Figure 221 “A Gen 3 16i CFF RAID adapter (four port connectors)” on page 256
– Figure 222 “A Gen 4 16i CFF RAID adapter (four port connectors)” on page 257
SFF RAID and HBA adapters
See this section to locate the connectors on SFF RAID and HBA adapters.
254
ThinkSystem SR630 V3 User Guide