Chapter 5. Hardware replacement procedures
This section provides installation and removal procedures for all serviceable system components.
Installation Guidelines
Before installing components in your server, read the installation guidelines.
Before installing optional devices, read the following notices carefully:
Attention: By keeping static-sensitive components in their static-protective packages until installation, and
handling these devices with an electrostatic-discharge wrist strap or other grounding system to prevent
exposure to static electricity which might lead to system halt and loss of data.
• Read the safety information and guidelines to ensure your safety at work:
– A complete list of safety information for all products is available at:
https://pubs.lenovo.com/safety_documentation/
– The following guidelines are available as well: “Working inside the server with the power on” on page 54
and “Handling static-sensitive devices” on page 54.
• Make sure the components you are installing are supported by your server.
– For a list of supported optional components for the server, see
https://serverproven.lenovo.com.
– For the option package contents, see
https://serveroption.lenovo.com/.
• For more information about ordering parts:
1. Go to
http://datacentersupport.lenovo.com, and enter the model name or machine type of your
server in the search bar to navigate to the support page.
2. Click Parts.
3. Enter the serial number to view a listing of parts for your server.
• When you install a new server, download and apply the latest firmware. This will help ensure that any
known issues are addressed, and that your server is ready to work with optimal performance. Go to
https://datacentersupport.lenovo.com/products/servers/thinksystem/sr630v3/7d72/downloads/driver-list/ and
download firmware updates for your server.
Important: Some cluster solutions require specific code levels or coordinated code updates. If the
component is part of a cluster solution, verify that the latest Best Recipe code level menu for cluster
supported firmware and driver before you update the code.
• If you replace a part, such as an adapter that contains firmware, you might also need to update the
firmware for that part. For more information about updating firmware, See
“Update the firmware” on page
433
.
• It is good practice to make sure that the server is working normally before you install an optional
component.
• Keep the working area clean, and place removed components on a flat and sturdy surface that does not
shake or tilt.
• Do not attempt to lift an object that might be too heavy for you. If you have to lift a heavy object, read the
following precautions carefully:
– Make sure that you can stand steadily without slipping.
– Distribute the weight of the object equally between your feet.
© Copyright Lenovo 2023 51
To Next Page
Loading...
