Lenovo ThinkSystem SR630 V3 - Integrated Functions and I;O Connectors; Network; Rear Button

Integrated functions and I/O connectors
Integrated functions and I/O connectors
• Lenovo XClarity Controller (XCC), which provides service processor control and monitoring functions, video
controller, and remote keyboard, video, mouse, and remote drive capabilities.
– The server supports Lenovo XClarity Controller 2 (XCC2). For additional information about Lenovo XClarity
Controller 2 (XCC2), refer to https://sysmgt.lenovofiles.com/help/topic/lxcc_frontend/lxcc_overview.html.
• One XCC system management port on the rear to connect to a systems-management network. This RJ-45
connector is dedicated to the Lenovo XClarity Controller functions and runs at 1 GB speed.
• A group of two or four Ethernet connectors on OCP module
• Up to four USB 3.2 Gen1 (5 Gbps) ports:
– Three on the rear of the server
– (Optional) One on the front of the server
1
• One internal USB 3.2 Gen1 (5 Gbps) port
• (Optional) One USB 2.0 port on the front of the server
1
• (Optional) External LCD diagnostics handset connector on the front of the server
1
• Up to two VGA connectors
– One on the rear of the server
– (Optional) One on the front of the server
1
• (Optional) One serial port connector on the rear of the server
2
Notes:
1. Available when the front I/O module is installed in the server.
2. Available when the serial port cable is installed in the server.
Network
Network
• OCP module
Note: The OCP module is an optional part. It is default to be installed in the rear and optional in the front of the server.
Rear button
Rear button
• NMI button
Chapter 1. Introduction 7