Appendix A. Hardware disassembling for recycle
Follow the instructions in this section to recycle components with compliance with local laws or regulations.
Disassemble the system board assembly for recycle
Follow the instructions in this section to disassemble the system board assembly before recycling.
Before disassembling the system board assembly:
1. Remove the system board assembly from the server. See
“Remove the processor board” on page 233.
2. Refer to local environmental, waste or disposal regulations to ensure compliance.
Step 1. Remove the following component as illustrated:
Table 173. Screw type
Screw type Quantity Tool type
12 PH2 screwdriver
5
Figure 375. Disassembling the system board assembly
© Copyright Lenovo 2023 483
To Next Page
Loading...
