Lenovo ThinkSystem SR630 V3 - Module

Drive LED Status Description
1 Drive status LED (right) Solid yellow
The drive has an error.
Blinking yellow (blinking slowly, about one
flash per second)
The drive is being rebuilt.
Blinking yellow (blinking rapidly, about four
flashes per second)
The RAID adapter is locating the drive.
2 Drive activity LED (left) Solid green
The drive is powered but not active.
Blinking green The drive is active.
LEDs on EDSFF drives
Figure 368. LEDs on EDSFF drives
Drive LED Status Description
1 Drive activity LED
Solid green
The drive is powered but not active.
Blinking green (about four flashed per
second)
The drive is active.
Off
The drive is not powered.
2 Drive status LED
Solid amber
The drive has an error.
Blinking amber (blinking slowly, about one
flash per second)
The drive is being rebuilt.
Blinking amber (blinking rapidly, about four
flashes per second)
The RAID adapter is locating the drive.
LEDs on the Firmware and RoT Security Module
The following illustrations show the light-emitting diodes (LEDs) on the ThinkSystem V3 Firmware and Root
of Trust Security Module (Firmware and RoT Security Module).
456
ThinkSystem SR630 V3 User Guide