Figure 100. M.2 backplane removal
a.
Loosen the captive screw on the M.2 backplane.
b.
Slide the backplane out and take it out of the cage.
Step 5. Remove the M.2 drives if necessary, see
“Remove the M.2 backplane and M.2 drive” on page 157.
After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Demo video
Watch the procedure on YouTube
Install the M.2 cage and M.2 backplane (16-EDSFF chassis)
Use the information in this topic to install the M.2 cage and M.2 backplane to the 16-EDSFF chassis.
About this task
Attention:
• Read
“Installation Guidelines” on page 51 and “Safety inspection checklist” on page 52 to ensure that you
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
“Power off the server” on page 68.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding systems.
Procedure
164 ThinkSystem SR630 V3 User Guide
To Next Page
Loading...
