Lenovo ThinkSystem SR630 V3 - Front I;O Module Replacement; Remove the Front I;O Module

Step 3. Remove the EDSFF drive cage cover.
Figure 51. EDSFF drive cage cover removal
a.
Open the handle as shown.
b.
Grasp the handle and remove the drive cage cover.
Step 4. Install EDSFF drives into the EDSFF cage. See
“Install a hot-swap EDSFF drive” on page 121.
After you finish
Complete the parts replacement. See “Complete the parts replacement” on page 246.
Demo video
Watch the procedure on YouTube
Front I/O module replacement
Use this information to remove and install the front I/O module.
Remove the front I/O module
Use this information to remove the front I/O module.
About this task
The following illustrates how to remove the front I/O module with a diagnostics panel. You can remove other
front I/O modules in the same way.
Attention:
102
ThinkSystem SR630 V3 User Guide