Lenovo ThinkSystem SR630 V3 - X 2.5 U.3 Drives with 10 X 2.5 Anybay Backplane (Liquid Cooling)

Figure 257. Cable routing for 8 x 2.5-inch front SAS/SATA drive bays with an 8i or 16i SFF RAID adapter (Gen 3)
Table 52. Mapping between one front SAS/SATA backplane and an SFF HBA/RAID adapter
Backplane From To
Front BP (SAS)
1 SAS 0, SAS 1 1 C0, C1
8 x 2.5'' U.3 drives with 10 x 2.5'' AnyBay backplane (liquid cooling)
Use this section to understand the cable routing for eight U.3 drives for liquid cooling configuration with 10 x
2.5'' Anybay backplane and one processor installed.
To connect cables for a 7mm drive backplane, refer to
“7mm drive backplane” on page 270.
To connect power cables for a backplane for standard 2.5-inch or 3.5-inch drives, refer to
“Cable routing for
backplane power” on page 274
.
Chapter 6. Internal cable routing 291