• The installation order of a single type of drives (SAS/SATA/NVMe) should be: front drive bay 0 → 1 → 2
→ 3 → 4 → 5 → 6 → 7 → 8 → 9.
• The installation order of mixed types of drives should be: SAS/SATA installed from front drive bay 0 →
1 → 2..., and NVMe installed from front drive bay 9 → 8 →7 → 6 → 5→ 4 → 3 → 2 → 1 → 0.
2. For the server models with rear drives installed, take 8 x 2.5'' SAS/SATA front drives and 2 x 2.5'' SAS/
SATA rear drives for instance:
Drives can be installed to rear drive bay 16 → 17 first, and then front drive bay 0 → 1 → 2 → 3 → 4 → 5 → 6
→ 7.
Thermal rules
This topic provides thermal rules for the server.
•
“Server models with front drive bays only” on page 65
• “Server models with front and rear drive bays” on page 66
• “Server models with GPU(s)” on page 66
• “Server models with liquid assisted cooling module” on page 67
Server models with front drive bays only
This section provides thermal information for server models with front drive bays only.
Configuration • 4 x 2.5'' SAS/SATA
• 4 x 2.5'' NVMe
• 4 x 3.5'' SAS/SATA
• 4 x 3.5'' AnyBay
• 6 x SAS/SATA + 2 x AnyBay + 2 x NVMe
• 6 x SAS/SATA + 4 x AnyBay
• 8 x 2.5'' SAS/SATA
• 10 x 2.5'' SAS/SATA
• 4 x 2.5'' SAS/
SATA
• 4 x 2.5''
NVMe
Max. Ambient
Temp. (at sea level)
45°C 35°C 30°C
CPU TDP
1
(watts) TDP ≤ 165 165 < TDP < 205 TDP = 205 205 < TDP ≤ 300 300 < TDP ≤ 350
Heat sink
Standard Standard
T-shape T-shape T-shape
Air baffle
√ √
x x x
Fan type
Standard Performance Performance Performance Performance
Max. DIMM Qty.
2
32 32 32 32 32
Configuration
• 8 x 2.5'' AnyBay drives with one processor
• 8 x 2.5'' U.2 drives with one processor
• 10 x 2.5'' AnyBay
• 10 x 2.5'' NVMe
• 16-EDSFF
Max. Ambient
Temp. (at sea level)
35°C 30°C
CPU TDP
1
(watts) TDP ≤ 165 165 < TDP < 205 TDP = 205 205 < TDP ≤ 300
Heat sink
Standard Standard
T-shape T-shape
Air baffle
√ √
x x
Chapter 5. Hardware replacement procedures 65
To Next Page
Loading...
