Lenovo ThinkSystem SR630 V3 - Front I;O Module

Cable routing for Gen 3 CFF RAID adapters
Table 40. Cable routing for Gen 3 CFF RAID adapters
Figure 227. Gen 3 CFF RAID adapter cabling with two
processors installed
Figure 228. Gen 3 CFF RAID adapter cabling with one
processor installed
From To From To
1 Power 1 Internal RAID power
connector
1 Power 1 Internal RAID power
connector
2 MB input
2 PCIe 3
2 MB input
2 PCIe 2
Note: When the server is installed with 4 x 2.5'' NVMe drives with two processors, the “MB input” connector
on the CFF RAID adapters connects to PCIe 2 on the processor board.
Front I/O module
Use the section to understand the cable routing for front I/O modules.
Cable routing for front I/O modules
• For the locations of front I/O module connectors on the processor board, see
“Processor-board
connectors for cable routing” on page 257
for details.
262
ThinkSystem SR630 V3 User Guide