Step 3. Install the PCIe adapter and secure it to the riser assembly.
Figure 107. PCIe adapter installation into the LP-FH riser assembly
a.
Align the PCIe adapter with the PCIe slot on the riser card. Then, carefully press the PCIe
adapter straight into the slot until it is securely seated and its bracket is secured.
b.
Rotate the latch on the riser bracket to closed position.
Notes:
1. Ensure that PCIe adapter installation meets the rules in
“PCIe slots and adapters” on page 61.
2. The procedure for installing a PCIe adapter is similar for different types of riser assembly. In
this topic, the LP-FH riser assembly is used as an example.
Step 4. Connect cables to the PCIe adapter in the riser assembly. See
Chapter 6 “Internal cable routing” on
page 249
.
After you finish
1. Reinstall the riser assembly. See “Install a riser card” on page 211.
2. Complete the parts replacement. See
“Complete the parts replacement” on page 246.
Demo video
Watch the procedure on YouTube
Power-supply-unit air baffle replacement
Use this information to remove and install a power-supply-unit air baffle.
172
ThinkSystem SR630 V3 User Guide
To Next Page
Loading...
