Step 2. Remove the security bezel.
Attention: Before you ship the rack with the server installed, reinstall and lock the security bezel
into place.
Figure 180. Security bezel removal
a. Press the release latch.
b.
Rotate the security bezel outward to remove it from the chassis.
After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the security bezel
Use this information to install the security bezel.
About this task
Attention:
• Read
“Installation Guidelines” on page 51 and “Safety inspection checklist” on page 52 to ensure that you
work safely.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding systems.
Watch the procedure
A video of this procedure is available on YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
CfNsWy-689CRZHExrZEi9I
.
Procedure
Step 1. If you have removed the rack latches, reinstall them. See
“Install the rack latches” on page 188.
Chapter 5. Hardware replacement procedures 215
To Next Page
Loading...
