Step 2. Grasp the fan tabs on both ends of the system fan and carefully lift the system fan out of the server.
Figure 200. System fan removal
After you finish
1. Install a new system fan or install a fan filler to cover the place. See “Install a system fan” on page 241.
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Demo video
Watch the procedure on YouTube
Install a system fan
Use this information to install a system fan. You can install a hot-swap fan without powering off the server,
which helps you avoid significant interruption to the operation of the system.
About this task
S033
CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
Chapter 5. Hardware replacement procedures 241
To Next Page
Loading...
