Lenovo ThinkSystem SR630 V3 - Leds on the System Board Assembly

Table 172. LEDs description (continued)
Scenario
AP0
LED
AP1
LED
Fatal
Error
LED
FPGA
heart-
beat
LED
note
XCC
heart-
beat
LED
note
Actions
UEFI firmware is recovered
from authentication failure
N/A On Off N/A N/A Information only. No action is
required.
System is OK (FPGA
heartbeat LED is On)
On On Off On On Information only. No action is
required.
Note: For locations of the FPGA LED and XCC heartbeat LED, see
“LEDs on the system board assembly” on
page 458
.
LEDs on the system board assembly
The following illustrations show the light-emitting diodes (LEDs) on the system board assembly.
Figure 370. LEDs on the system board assembly
1 System error LED (yellow)
2 System ID LED (blue)
3 XCC heartbeat LED (green)
4 PCH heartbeat LED (green)
5 FPGA heartbeat LED (green)
6 System status LED (green)
7 DIMM error LEDs (amber)
458 ThinkSystem SR630 V3 User Guide