Figure 78. Remove an EDSFF drive filler
a. Press the latch down to disengage the drive clip from the cage.
b.
Pull and slide the filler out.
Step 3. Install the EDSFF drive.
Figure 79. EDSFF drive installation
a. Ensure that the drive tray handle is in the open position. Slide the drive into the drive bay
until it snaps into position.
b.
Close the drive tray handle to lock the drive in place.
Step 4. Continue to install additional EDSFF drives if necessary.
122
ThinkSystem SR630 V3 User Guide
To Next Page
Loading...
