• Read “Installation Guidelines” on page 51 and “Safety inspection checklist” on page 52 to ensure that you
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
“Power off the server” on page 68.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding systems.
Procedure
Step 1. Touch the static-protective package that contains the OCP module to any unpainted surface on the
outside of the server. Then, take the OCP module out of the package and place it on a static-
protective surface.
Step 2. Attach the OCP module label that comes with this option on the rear of the server.
Figure 104. OCP module label installation
168 ThinkSystem SR630 V3 User Guide
To Next Page
Loading...
