Table 37. Server rear configuration and riser assemblies
1
(continued)
Server rear configuration
Riser 1 assembly Riser 2 assembly
Figure 159. One PCIe slot
Figure 160. Riser 1 LP-LP
bracket
Choose either one below to
assemble:
•
Figure 161. Riser 1 BF card
•
Figure 162. Riser 1 card
Riser 2 assembly is not
supported.
Figure 163. One PCIe slot
Figure 164. Riser 1 LP bracket
Figure 165. Riser 1 card
Riser 2 assembly is not
supported.
Notes:
1. The illustrations of riser brackets and cards may look slightly different from the physical ones.
2. BF: “butterfly”, a riser card with slots on both sides.
The overview of riser brackets
See this section to identify different riser brackets.
Chapter 5. Hardware replacement procedures 207
To Next Page
Loading...
