Lenovo ThinkSystem SR630 V3 - Page 234

• Read “Installation Guidelines” on page 51 and “Safety inspection checklist” on page 52 to ensure that you
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
“Power off the server” on page 68.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
• After replacing the Firmware and RoT Security Module, update the firmware to the specific version
supported by the server. Make sure that you have the required firmware or a copy of the pre-existing
firmware before you proceed.
Firmware and driver download: You might need to update the firmware or driver after replacing a
component.
• Go to
https://datacentersupport.lenovo.com/products/servers/thinksystem/sr630v3/7d72/downloads/driver-
list/
to see the latest firmware and driver updates for your server.
• Go to
“Update the firmware” on page 433 for more information on firmware updating tools.
Step 1. Prepare your server.
a. Perform OneCLI commands to back up the UEFI settings. See
https://sysmgt.lenovofiles.com/
help/topic/toolsctr_cli_lenovo/onecli_r_save_command.html
.
b. Perform both OneCLI commands and XCC actions to back up the XCC settings. See
https://
sysmgt.lenovofiles.com/help/topic/toolsctr_cli_lenovo/onecli_r_save_command.html
and https://
sysmgt.lenovofiles.com/help/topic/com.lenovo.systems.management.xcc2.doc/NN1ia_c_
backupthexcc.html
.
c. Remove the top cover. See
“Remove the top cover” on page 243.
d. If your server comes with a rear drive assembly, remove it first. See
“Remove the 2.5-inch rear
drive assembly” on page 198
.
e. If your server comes with a 7mm rear drive assembly, remove it first. See
“Remove the 7mm
rear drive assembly” on page 202
.
f. If your server comes with riser assemblies, remove them first, see
“Riser assemblies” on page
204
.
224
ThinkSystem SR630 V3 User Guide