Figure 232. RAID flash power modules in the chassis
Location Scenario
1 RAID flash power module on the chassis 2.5'' chassis installed with a standard or performance
heat sink
2 RAID flash power module on the air baffle 2.5'' or 3.5'' chassis installed with a standard heat sink
3 RAID flash power module on slot 3
• 3.5'' chassis installed with a performance heat sink
• 2.5'' chassis installed with liquid assisted cooling
module
Cable routing of the RAID flash power modules
The following illustrations show the cable routing of the RAID flash power modules on different locations:
Chapter 6. Internal cable routing 265
To Next Page
Loading...
