Figure 247. Cable routing for onboard configuration of six SAS/SATA and four NVMe front drives
Table 42. Mapping between one front AnyBay backplane and processor board for onboard configuration
Backplane From To
Front BP (SAS)
1 SAS 0 1 SATA 0
2 SAS 1, 2 2 SATA 1, 2
Front BP (NVMe)
3 NVMe 0–1
3 PCIe 2
4 NVMe 2–3
4 PCIe 1
Cable routing with an SFF HBA/RAID adapter
The following tables show the mapping relationship between backplane connectors and an 8i or 16i SFF
HBA/RAID adapter (Gen 4).
Chapter 6. Internal cable routing 279
To Next Page
Loading...
