Figure 252. Cable routing for onboard configuration of six SAS/SATA drives and two AnyBay and two NVMe front drives
bays
Table 47. Mapping between one front AnyBay backplane and processor board for onboard configuration
Backplane From To
Front BP (SAS)
1 SAS 0 1 SATA 0
2 SAS 1 2 SATA 1
Front BP (NVMe)
3 NVMe 0–1
3 PCIe 2
4 NVMe 2–3
4 PCIe 1
Cable routing with an SFF HBA/RAID adapter
The following tables show the mapping relationship between backplane connectors and an SFF HBA/RAID
adapter.
Chapter 6. Internal cable routing 285
To Next Page
Loading...
