Figure 272. Cable routing of 4 x 2.5-inch front NVMe drive bays and a re-timer adapter (Gen 4) with one processor
Table 72. Mapping between a front backplane and a re-timer adapter connectors
Backplanes From To
Front BP (NVMe)
NVMe 0–1, NVMe 2–3
C0, C1
4 x 2.5'' U.3 front drives with 4 x 3.5'' AnyBay backplane (one processor)
Cable routing with an SFF HBA/RAID adapter
The following illustrations and tables show the mapping relationship between backplane connectors and an
8i SFF RAID adapter (Gen 4).
Chapter 6. Internal cable routing 317
To Next Page
Loading...
