Figure 279. Cable routing for 8 x 2.5-inch front SAS/SATA drive bays with an 8i SFF RAID adapter (Gen 3) with 2 x 2.5
SAS/SATA rear drives installed
Table 79. Mapping between one front SAS/SATA backplane and an SFF HBA/RAID adapter
Backplane From To
Front BP (SAS)
1 SAS 0, SAS 1 1 C0, C1
Rear BP (SAS)
2 SAS 2 SATA 2
Cable routing with a CFF RAID adapter
The following illustration and table show the mapping relationship between backplane connectors and an 8i
or 16i CFF RAID adapter (Gen 3).
Chapter 6. Internal cable routing 325
To Next Page
Loading...
