Figure 288. Cable routing for 6 front SAS/SATA drives and 4 front AnyBay drives bays and a 16i SFF RAID adapter (Gen 4)
with 2 x 2.5 rear SAS/SATA drives installed
Table 88. Mapping between one front AnyBay and one rear SAS/SATA backplanes and an SFF HBA/RAID adapter
Backplane From To
Front BP (SAS)
1 SAS 0, SAS 1 1 C0
Front BP (NVMe)
2 NVMe 2–3, 0–1
2 PCIe 1, 2
Front and Rear BP (SAS)
3 SAS 2 (front), SAS (rear) 3 C1
Chapter 6. Internal cable routing 335
To Next Page
Loading...
