Table 118. Mapping between backplane and processor board for onboard configuration
Backplanes From To
Front BP (NVMe) NVMe 0–1, NVMe 2–3 PCIe 3, PCIe 4
4 x 2.5'' U.3 front drives with 4 x 3.5'' AnyBay backplane
Use this section to understand the cable routing for four U.3 drives with 4 x 3.5'' Anybay backplane and two
processors installed.
Cable routing with an SFF HBA/RAID adapter
The following illustrations and tables show the mapping relationship between backplane connectors and an
8i SFF RAID adapter (Gen 4).
Figure 312. Cable routing for 4 x 2.5-inch front U.3 drives with an 8i SFF RAID adapter (Gen 4)
Chapter 6. Internal cable routing 371
To Next Page
Loading...
