Figure 318. Cable routing for 8 x 2.5-inch front SAS/SATA drive bays with an 8i or 16i SFF RAID adapter (Gen 3) with 2 x
2.5 SAS/SATA rear drives installed
Table 125. Mapping between one front and one rear SAS/SATA backplanes and an SFF HBA/RAID adapter
Backplane From To
Front BP (SAS)
1 SAS 0, SAS 1 1 C0, C1
Rear BP (SAS)
2 SAS 2 SATA 2
Cable routing with a CFF RAID adapter
The following illustrations and tables show the mapping relationship between backplane connectors and an
8i or 16i CFF RAID adapter (Gen 3 or Gen 4).
378
ThinkSystem SR630 V3 User Guide
To Next Page
Loading...
