Figure 324. Cable routing for onboard configuration of 6 front SAS/SATA drives and 4 front NVMe drives bays
Table 131. Mapping between one front AnyBay backplane and processor board for onboard configuration
Backplane From To
Front BP (SAS)
1 SAS 0 1 SATA 0
2 SAS 1 2 SATA 1
Front BP (NVMe)
3 NVMe 2–3, 0–1
3 PCIe 1, PCIe 2
Cable routing with an SFF HBA/RAID adapter
The following tables show the mapping relationship between backplane connectors and a 16i SFF HBA/RAID
adapter (Gen 3 or Gen 4).
Chapter 6. Internal cable routing 385
To Next Page
Loading...
