Figure 331. Cable routing for onboard configuration of 6 SAS/SATA drives and 2 AnyBay and 2 NVMe front drives bays
Table 138. Mapping between one front AnyBay backplane and processor board for onboard configuration
Backplane From To
Front BP (SAS)
1 SAS 0 1 SATA 0
2 SAS 1 2 SATA 1
3 NVMe 2–3, 0–1
3 PCIe 1, 2
Cable routing with an SFF HBA/RAID adapter
The following tables show the mapping relationship between backplane connectors and an SFF HBA/RAID
adapter.
Chapter 6. Internal cable routing 393
To Next Page
Loading...
