Figure 339. Cable routing for 10 front SAS/SATA drives bays and a 16i SFF RAID adapter (Gen 3) with 2 x 2.5 rear SAS/
SATA drives installed
Table 146. Mapping between one front AnyBay and one rear SAS/SATA backplanes and an SFF HBA/RAID adapter
Backplane From To
Front BP (SAS)
1 SAS 0, SAS 1 1 C0, C1
2 SAS 2 2 C2
Rear BP (SAS)
3 SAS 3 C3
Cable routing with a CFF RAID adapter
The following tables show the mapping relationship between backplane connectors and a 16i CFF RAID
adapter (Gen 3 or Gen 4).
402
ThinkSystem SR630 V3 User Guide
To Next Page
Loading...
