Lenovo ThinkSystem SR630 V3 - Page 419

Figure 345. Cable routing for 10 front AnyBay drives and 2 rear SAS/SATA drives with a 16i SFF RAID adapter (Gen 3)
Table 152. Mapping between one front AnyBay and one rear SAS/SATA backplanes and an SFF HBA/RAID adapter
Backplane From To
Front BP (SAS)
1 SAS 0, SAS 1 1 C0, C1
Front BP (NVMe)
2 NVMe 2–3, 0–1, 4–5
2 PCIe 3, 4, 5
3 NVMe 8–9, 6–7
3 PCIe 1, 2
Front and rear BP (SAS)
4 SAS 2 (front) 4 C2
Rear BP (SAS)
5 SAS (rear) 5 C3
10 x 2.5'' NVMe
Use this section to understand the cable routing of 10 NVMe front drives.
Chapter 6. Internal cable routing 409