Figure 350. Cable routing for six front SAS/SATA drives and four front AnyBay drives bays and a 16i SFF RAID adapter
(Gen 4) with two rear SAS/SATA drives installed
Table 157. Mapping between one front AnyBay and one rear SAS/SATA backplanes and an SFF RAID adapter
Backplane From To
Front BP (SAS)
1 SAS 0–3, 4–7 1 C0
Front BP (power)
2 Power and sideband
2 Power port for front BP
Front and rear BP (SAS)
3 SAS 8–9, SAS (rear) 3 C1
Front BP (NVMe)
4 NVMe 6–7
4 PCIe 2
5 NVMe 8–9
5 PCIe 1
Chapter 6. Internal cable routing 415
To Next Page
Loading...
