Figure 352. Cable routing for six front SAS/SATA drives and four front AnyBay drives bays and a 16i SFF RAID adapter
(Gen 3) with two rear SAS/SATA drives installed
Table 159. Mapping between one front AnyBay and one rear SAS/SATA backplanes and an SFF RAID adapter
Backplane From To
Front BP (SAS)
1 SAS 0–3, 4–7 1 C0
Front BP (power)
2 Power and sideband
2 Power port for front BP
Front BP (SAS)
3 SAS 8–9 3 C1
Rear BP (SAS)
4 SAS (rear) 4 C2
Front BP (NVMe)
5 NVMe 6–7
5 PCIe 2
6 NVMe 8–9
6 PCIe 1
Cable routing with a CFF HBA/RAID adapter
The following tables show the mapping relationship between backplane connectors and a CFF HBA/RAID
adapter.
Chapter 6. Internal cable routing 417
To Next Page
Loading...
