• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
“Power off the server” on page 68.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding systems.
CAUTION:
Make sure to have three people operate the server removal procedures to prevent injury.
Procedure
Step 1. Loosen the two
2 thumbscrews located on the 1 rack latches to disengage it from the rack.
Rack front
Figure 21. Disengaging server from the rack
Step 2. Hold the
1 mounting ears on the front of the server; then, slide the server all the way out until it
stops.
70
ThinkSystem SR630 V3 User Guide
To Next Page
Loading...
