8400 StateLine C | Reference manual
I/O terminals
Digital terminals
262 L Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011
Internal interfaces to the application
Relevant inputs at the LS_DigitalInput
system block:
Relevant outputs at the LS_DigitalInput
system block:
Related topics:
Output of the encoder position of the DI1/DI2 frequency input
( 268)
Using DI1 and DI2 as digital inputs
( 258)
Using DI1 as a counter input
( 263)
Internal interfaces | System block "LS_DigitalInput"
( 266)
Input
Data type
Information/possible settings
Frequency input DI1/DI2
bPosIn12_Load
BOOL
(from version 06.00.00)
Load angle integrator with starting value and reset status signal
TRUE Angle integrator is loaded with the value at dnPosIn12_Set_p and
bPosIn12_State is reset to FALSE.
dnPosIn12_Set_p
DINT
(from version 06.00.00)
Starting value for angle integrator
Output
Data type
Value/meaning
Frequency input DI1/DI2
nFreqIn12_a
C00446/1 | INT
Output frequency as scaled analog signal in [%]
nFreqIn12_v
C00445/1 | INT
Output frequency as speed signal in [inc/ms]
To Next Page
Loading...
