8400 StateLine C | Reference manual
Working with the FB Editor
Reconfiguring the predefined interconnection
756 L Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011
15.4.4.2 Creating a connection using port identifiers
How to create a connection with port identifiers:
1. Click the port identifier.
• The selected port is highlighted in light green:
2. Drag the port segment to the required port while keeping the left mouse button
pressed:
After releasing the mouse button, the connection via port identifiers (flags) is
created. The corresponding port identifier consists of the block name and the name
of the input/output:
Tip!
The command Show as line in the context menu of a flag serves to change the
representation of the connection at any time.
To Next Page
Loading...
