Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011 L 393
8400 StateLine C | Reference manual
Diagnostics & error management
Logbook
9.5.5 File logbook in project
If you want to display the currently available logbook entries at a later date in offline mode,
i.e. without a connection to the controller, you can file the current logbook in the project.
How to file the logbook in the project:
Go to the Logbook dialog box and click the File in project button.
The logbook with all the entries uploaded up to now is filed in the Engineer project
independent of the set filter criteria.
A logbook of the same device already filed before will be overwritten without querying
the user.
The filter settings are not filed in the project.
When a logbook is filed in the project, the logbook can also be opened in offline mode
via the Logbook button on the Diagnostics tab.
Note!
Filing the logbook changes the project.
• When the project is closed, you are asked to save the changed project.
• Only if the changed project is saved, the new logbook entries filed in the
project remain stored.
To Next Page
Loading...
