Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011 L 875
8400 StateLine C | Reference manual
Function library
System blocks | LS_SetError_1
Parameter
16.2.22 LS_SetError_1
Parameterisable responses to user-defined events are tripped.
16.2.23 LS_SyncManagement
Output of status information for synchronising the internal time base.
16.2.24 LS_WriteParamList
Writing to a configurable list which contains up to 32 local parameters.
Parameter Possible settings Info
C00400/1
0 ms 60000 Length of LOW level (break)
• For output bSquareWave
• Lenze setting: 1000 ms
C00400/2
0 ms 60000 Length of HIGH level
• For output bSquareWave
• Lenze setting: 1000 ms
C00400/3
(from version 06.00.00)
0 ms 60000 Delay of the bFirstCycleDone status
• Lenze setting: 100 ms
For a detailed description see the main chapter "Diagnostics & error
management":
System block "LS_SetError_1"
( 425)
For a detailed description see main chapter "Synchronisation of the internal time
base of the controller":
Internal interfaces | System block "LS_SyncManagement"
( 508)
For a detailed description see the main chapter "Parameter change-over". ( 509)
To Next Page
Loading...
