Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011 L 391
8400 StateLine C | Reference manual
Diagnostics & error management
Logbook
9.5.3 Reading out logbook entries
With an online connection, the existing logbook entries can easily be displayed in the
»Engineer«. Alternatively, the logbook entries can also be read out via the corresponding
parameters (e.g. using the keypad).
How to display logbook entries in the »Engineer«:
1. Select the 8400 StateLine controller in the project view.
2. Click the icon or execute the OnlineGo online command to establish an online
connection to the controller.
3. Select the Diagnostics tab from the Workspace.
4. Click Logbook.
Example: Representation of the logbook in the »Engineer« V2.13
Button Function
Reset filters Reset set filter criteria to display all available logbook entries.
Export... Export the entries available in the logbook into a *.log file.
Exporting logbook entries to a file
( 392)
File in project File the current logbook in the Engineer project to be able to access it offline,
too.
File logbook in project
( 393)
Delete Delete all entries available in the logbook.
Configure... Open parameterisation dialog for configuring the logbook.
To Next Page
Loading...
