Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011 L 395
8400 StateLine C | Reference manual
Diagnostics & error management
Monitoring
9.6.1 Monitoring configuration
How to configure the monitoring functions using the »Engineer«:
1. Select the 8400 StateLine controller in the Project view.
2. Select the Diagnostics tab from the Workspace.
3. Click the Monitoring... button.
•The 8400 monitoring configuration dialog box is displayed via which the desired
settings can be made:
Related topics:
Setting the error response
( 396)
To Next Page
Loading...
