Lenze 8400 StateLine C - Ls_Disfree_B

Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011 L 861
8400 StateLine C | Reference manual
Function library
System blocks | LS_DisFree_b
16.2.9 LS_DisFree_b
This system block displays any eight digital signals of the application on a bit-coded display
code.
Inputs
Parameter
16.2.10 LS_DriveInterface
Interface to internal device control.
Identifier
Data type
Information/possible settings
bDis1 ... bDis8
BOOL
From version 11.00.00:
bC480_B0 ... bC480_B7
Inputs for any digital signal of the application
Note: From version 11.00.00 the inputs are named according to the display
parameter for an easier allocation.
Parameter Possible settings Info
C00480
0x0000 0xFFFF Display of the digital signals applied
at the bDis1 ... bDis8 inputs in the
form of hexadecimal values
Bit 0 Signal level at the bDis1 input
Bit 1 Signal level at the bDis2 input
Bit 2 Signal level at the bDis3 input
... ...
Bit 7 Signal level at the bDis8 input
E'LV
E'LV
E'LV
E'LV
E'LV
&
%LW
%LW
%LW
%LW
%LW
/6B'LV)UHHBE
 For a detailed description see main chapter "Device control (DCTRL)":
Internal interfaces | "LS_DriveInterface" system block
( 100)
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com