Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011 L 773
8400 StateLine C | Reference manual
Function library
Function blocks
Related topics:
Overview of system blocks available
( 855)
Working with the FB Editor
( 720)
L_OffsetGainP_1
L_OffsetGainP_2
L_OffsetGainP_3
17 μs ... can add an offset to an analog input signal and amplify it afterwards.
• Offset and gain can be set via parameters.
L_Or_1
L_Or_2
L_Or_3
L_Or_4
2 μs ... ORs three binary signals.
• L_Or_4 is available from version 11.00.00.
L_PCTRL_1
20 μs ... is a PID controller and can be used for various control tasks.
L_PT1_1
1 μs ... filters and delays analog signals.
L_RLQ_1
3 μs ... links a selected direction of rotation to the QSP function with wire-
break protection.
L_SignalMonitor_a
15 μs ... serves to output analog output signals of other FBs, SBs or LAs.
L_SignalMonitor_b
3 μs ... serves to output binary output signals of other FBs, SBs or LAs.
L_Transient_1
L_Transient_2
L_Transient_3
L_Transient_4
3 μs ... evaluates digital signal edges and converts them into timed pulses.
Function block Runtime Function
To Next Page
Loading...
