Lenze 8400 StateLine C

Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011 L 873
8400 StateLine C | Reference manual
Function library
System blocks | LS_ParReadWrite_1-3
Internal conversion
If arithmetic modes 1 ... 3 are selected in C01093
, the input value / read parameter value is
internally converted via parameterisable factors.
 Division is not
remainder considered.
[16-28] Internal conversion for write access
[16-29] Internal conversion for read access
C01094: Numerator
C01095
: Denominator
Parameter value to be written Input value
[32]
Numerator
[16]
Denominator
[16]
-------------------------------------------
⋅=
C01094: Numerator
C01095
: Denominator
Output value
[32]
Read parameter value
Numerator
[16]
Denominator
[16]
-------------------------------------------
⋅=
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com