36992 0x9080 Keypad removed Keypad display: K
eypad removed
Cause Remedy Error type/response
The keypad was removed while the keypad
c
ontrol was acvated.
•
Plug k
eypad back in or acvate another
c
ontrol source.
Fault
Related topics
4Changing the c
ontrol source during operaon ^ 60
65285 0xFF05 Safe Torque
O is locked Keypad display: STO locked
Cause Remedy Error type/response
Error message is not available for the inverter
i410.
Fault
•
The in
verter is disabled immediately. The
motor has no torque (coasts).
•
The error can only be reset by mains
switching.
65286 0xFF06 Motor overspeed Keypad display: Mot
or overspeed
Cause Remedy Error type/response
The motor speed has reached the error
thr
eshold for overspeed set in 0x2D44:001
(P350.01).
Adapt the maximum motor speed 0x6080
(P322.00) and the warning threshold or error
threshold 0x2D44:001 (P350.01).
Fault (congurable)
•
The err
or can only be reset aer a blocking
me.
Blocking me: 1 s
Seng parameters: 0x2D44:002
(P350.02)
Related topics
4Mot
or speed monitoring ^ 196
65289 0xFF09 Motor phase missing Keypad display: Mot.Phase miss.
Cause Remedy Error type/response
A failure of several motor phases has been
de
tected.
•
Check wiring be
tween inverter and motor.
•
In case of a false tripping, adapt the sengs
for the motor phase failure detecon.
No response
(congurable)
•
The err
or can only be reset aer a blocking
me.
Blocking me: 2 s
Seng parameters: 0x2D45:001
(P310.01)
Related topics
4Mot
or phase failure detecon ^ 195
65290 0xFF0A Motor phase failure phase U Keypad display: Phase U f
ailure
Cause Remedy Error type/response
A failure of the motor phase U has been
de
tected.
•
Check wiring be
tween inverter and motor.
•
In case of a false tripping, adapt the sengs
for the motor phase failure detecon.
No response
(congurable)
•
The err
or can only be reset aer a blocking
me.
Blocking me: 2 s
Seng parameters: 0x2D45:001
(P310.01)
Related topics
4Motor phase failure detecon ^ 195
Diagnoscs and fault eliminaon
Error codes, causes and remedies
304