Gocator Snapshot Sensors: User Manual
Gocator Web Interface • 103
When the sensor is in Profile mode, or in Surface mode when a section is displayed, a safety goggle mode
button ( ) is available in the data viewer. Enabling this mode changes some colors to ensure that
profiles are visible in the data viewer when wearing laser safety goggles.
Video Mode
In Video mode, the data viewer displays a camera image from either of the two cameras in the sensor. In
this mode, you can configure the data viewer to display exposure, spot, and dropout information that
can be useful in properly setting up the system for scanning.
Exposure Information
In Video mode, you can display exposure-related information.
Exposures
If you have set Exposure Mode to Multiple, and have set more than one exposure, a drop-down at the
top of the data viewer lists the available exposures. Choosing an exposure changes the view of the data
viewer to that exposure.
To Next Page
Loading...
Need help?
General
