Gocator Snapshot Sensors: User Manual
Gocator Device Files • 308
Element Type Description
ation sensor)
MultiplexSingleDelay 64f Delay in µs. (Currently gets rounded up when read by the sensor.)
MultiplexSinglePeriod 64f Period in µs. (Currently gets rounded up when read by the sensor.)
MultiplexSinglePeriod.min 64f Minimum period in µs.
Element Type Description
X 64f X start(mm).
Y 64f Y start (mm).
Z 64f Z start (mm).
Width 64f X extent (mm).
Length 64f Y extent (mm).
Height 64f Z extent (mm).
ZAngle 64f Z Angle start (degrees).
ZAngle.used Bool Whether or not this property is used.
Region3D Child Elements
Element Type Description
ColumnCount 32u Column count.
ColumnCount.value 32u Column count value.
Grid Elements
Alignment
The Alignment element contains settings related to alignment and encoder calibration.
Element Type Description
@used Bool Whether or not this field is used
InputTriggerEnabled Bool Enables digital input-triggered alignment operation.
InputTriggerEnabled.used Bool Whether or not this feature can be enabled. This feature is available only
on some sensor models.
InputTriggerEnabled.value Bool Actual feature status.
Type 32s
Type of alignment operation:
0 – Stationary
1 – Moving
Type.options 32s (CSV) List of available alignment types.
StationaryTarget 32s
Stationary alignment target:
0 – None
1 – Disk
2 – Bar
Alignment Child Elements
To Next Page
Loading...
Need help?
General
