LMI Technologies Gocator 3210 User Manual

Gocator Snapshot Sensors: User Manual
Tools and Native Drivers • 516
To use the transfer tool:
1. Make sure the sensor you wish to work with is configured properly.
See Configuring Gocator to Work with the Transfer Tool on page 514.
2. (Optional) Modify the timeout or check the Use accelerator option.
See the table above for more information.
3. Click the Snapshot button or press F2.
The sensor takes a snapshot, and the scan data transfers to the tool.

LMI Technologies Gocator 3210 Specifications

General

Brand	LMI Technologies
Model	Gocator 3210
Category	Accessories
Language	English