Gocator Snapshot Sensors: User Manual
Specifications • 542
For information on configuring the DIPswitches, see Configuring Master 810 on page 27.
Function Pin
Power In+ 1
Power In+ 2
Power In- 3
Power In- 4
Reserved 5
Reserved 6
Power and Safety (6 pin connector)
The power supply must be isolated from AC ground. This means that AC ground and DC ground
are not connected.
On earlier revisions of Master 810 and Master 2410, the inputs are labeled 0-3.
Function Pin
Input 1 Pin 1 1
Input 1 Pin 2 2
Reserved 3
Reserved 4
Reserved 5
Reserved 6
Reserved 7
Input (10 pin connector)
To Next Page
Loading...
Need help?
General
