Magnetek IMPULSE G+ 4 Series User Manual

IMPULSE
®
•G+ & VG+ Series 4 Technical Manual
November 2020
Page 229
C03-11 Load Share Limit 0 0, 1 - Page 86
C03-12 Klixon Action 0 0, 1 - Page 87
C03-13 Height Measure 250 0–65535 Rev Page 88
C03-14 Hook Height Home 2 0–4 - Page 88
C03-15 Hook Height Out 0 0, 1 - Page 88
C03-16 UL2 Revolutions 0 0–65535 Rev Page 89
C03-17 UL1 Revolutions 0 0–65535 Rev Page 89
C03-18 LL1 Revolutions 0 0–65535 Rev Page 89
C03-19 LL2 Revolutions 0 0–65535 Rev Page 89
C04-01 Load Float Time2 10 0–65535 sec Page 92
C04-02 Load Float Gain 10**‘ 0–100 - Page 92
C05-01 Load Check 0 0, 1, 3, 9 - Page 94
C05-02 LC Alarm Action 4 0–4 - Page 94
C05-03 Holding Time 0.15 0.00–2.55 sec Page 94
C05-04 Testing Time 0.25 0.00–2.55 sec Page 94
C05-05 I/T Margin Acc 5 0–50 % Page 94
C05-07 I/T Margin 5 0–20 % Page 94
C05-08 Alarm Speed 6.0 0.0–30.0 Hz Page 94
C05-09 I/T Level 01 0 0–250 % Page 94
C05-10 I/T Level 02 0 0–250 % Page 94
C05-11 I/T Level 03 0 0–250 % Page 94
C05-12 I/T Level 04 0 0–250 % Page 94
C05-13 I/T Level 05 0 0–250 % Page 94
C05-14 I/T Level 06 0 0–250 % Page 94
C05-15 I/T Level 07 0 0–250 % Page 94
C05-16 I/T Level 08 0 0–250 % Page 94
C05-17 I/T Level 09 0 0–250 % Page 94
C05-18 I/T Level 10 0 0–250 % Page 94
C05-19 I/T Level 11 0 0–250 % Page 94
C05-20 I/T Level 12 0 0–250 % Page 94
C05-21 I/T Level 13 0 0–250 % Page 94
C05-22 I/T Level 14 0 0–250 % Page 94
C05-23 I/T Level 15 0 0–250 % Page 94
C05-24 I/T Level 16 0 0–250 % Page 94
C05-25 LC Integral Time 0.05 0.00–2.55 sec Page 94
C05-26 LC Delay Time 0.25 0.00–2.55 sec Page 94
C05-27 Min I->Fwd Tim 0.0 0.0–25.5 sec Page 94
C05-28 Dly Trig Freq 30.0 0.0–60.0 Hz Page 94
C06-01
Swift-Lift (V/f and OLV)
Ultra-Lift (FLV)
0 0–4 - Page 96
C06-02
SwiftLift FWDSpd (V/f and OLV)
UltraLift FWDSpd (FLV)
60.0 0.1–150.0 Hz Page 96
Parameter Parameter Name Default Range Units Reference

Magnetek IMPULSE G+ 4 Series Specifications

General

Brand	Magnetek
Model	IMPULSE G+ 4 Series
Category	DC Drives
Language	English