EU Declaration of Conformity IMPULSE·G+ VG+ Series 4 and G+ Mini English
EU Declaration of Conformity Certificate
For the following equipment:
Product : IMPULSE®•G+ & VG+ Series 4 Variable Frequency Drives
IMPULSE®•G+ Mini Variable Frequency Drives
Manufacturer’s Name : Magnetek, Inc.
Manufacturer’s Address : N49W13650 Campbell Drive
Menomonee Falls, WI 53051
The undersigned hereby declares on behalf of Magnetek, that the above-referenced product, to which this declaration relates, is in conformity with
the provisions of the following directives:
• Low Voltage Directive (2014/35/EU)
• Electromagnetic Compatibility Directive (2014/30/EU)
• Machine Directive (2006/42/EC)
The standards relevant for the evaluation of the product referenced above conformity to the directive requirements are as follows:
EN ISO 13849-1:2008/AC:2009 (Cat. 3, PL d)
EN 61800-3:2004/A1:2012
EN 61800-5-1:2007
EN 61800-5-2:2007 (SIL2)
EN 61000-6-2:2005
The Technical Construction File is maintained at: Columbus McKinnon Corporation
13830 Ballantyne Corporate Place
Suite 300
Charlotte, NC 28277 USA
The European contact for technical documentation is: Ian Knight
STAHL CraneSystems, Ltd.
Unit 2 Forge Mills Park
Station Road
Coleshill
Warwickshire B46 1JH
United Kingdom
Per Annex II.B of the Machinery Directive (2006/42/EC):
The machinery, product, assembly or sub-assembly covered by this Declaration of Conformity must not be put into service until the machinery
into which it is to be incorporated has been declared in conformity with the provisions of the applicable Directive(s). This statement is only
necessary where the product is to be incorporated into a machine or system (e.g. a safety component).
Signature of Authorized Person:
Ben Stoller
Global Product Manager - Controls
Columbus McKinnon Corporation
Date of Issuance:
To Next Page
Loading...
Need help?
General
