– Programming Manual 23. Gap & Crash Function 147
GAP control area
Status of GAP control
The status of GAP control is indicated by a LED:
LED lit: GAP control enabled
LED not lit: GAP control triggered
Type of gain acquisition
It is possible to select two different types of gain control procedure:
automatic gain control procedure (with variable and oscillating background
noise)
fixed gain control procedure (with stable and repetitive background noise).
To select, proceed as follows:
highlight the desired field with , display the desired icon with or , and
press to confirm.
Start/Stop gain automatic acquisition
Start gain automatic acquisition (enabled only if the automatic gain control
procedure
has been selected).
Stop gain automatic acquisition (the selection of gain acquisition type is
disabled).
CRASH control area
Scroll bar for gain value adjustment
Key
=
Key
=
Status of GAP control
Gain acquisition type
Start/Stop gain
automatic acquisition
Scroll bar for gain value adjustment
Key
=
Key
=
Status of CRASH control
To Next Page